

DIGITAL SOLUTIONS
Total Earth Pressure Cells
Total Earth Pressure Cells are designed to measure stress acting on plane surfaces.
Overview
Overview
Total Earth Pressure Cells are designed to measure stress acting on plane surfaces. Total Earth Pressure Cells are constructed from two circular stainless steel plates, welded together around their periphery. The annular space between these plates is filled with deaired glycol. The cell is connected via a stainless steel tube to a transducer forming a closed hydraulic system. The stress is then converted to a signal and may be remotely read on a variety of portable readout units or data loggers.
RST Total Earth Pressure Cells are calibrated as a complete assembly (rather than just the sensor) to capture the calibration of the complete cell for highest quality of data.
Product features
- Long-term stability
- Constant monitoring capability
- Stainless steel construction
- High accuracy and sensitivity
- Ease of data logging
Features and benefits
Features and benefits
Total Earth Pressure Cell Specifications
| Item | Model LPTPC-V | Model LPTPC-S |
| Transducer Type | Vibrating Wire | Silicon Strain Gauge |
| Range – Standard Calibration | Up to 3.0 MPa (435 psi) | Up to 3.0 MPa (435 psi) |
| Range – Max Available | 20 MPa (3000 psi) | 20 MPa (3000 psi) |
| Calibrated Accuracy | 0.15% F.S. | 0.15% F.S. |
| Resolution | 0.025% F.S. minimum | Infinite |
| Excitation Voltage | 5 V sq. Wave | Dependent on sensor |
| Signal Output | 1200 – 3550 HZ | 4-20 mA 0-5 VDC 0-10 VDC 4-20 mA + RS485 0-5 VDC + RS485 |
| Thermistor | Yes (standard) | Optional (can be added) |
| Conductor | 4 X #22 (2 for VW, 2 for Thermistor) | 4 X #22 | 2 X #22 |
| Operating Temperature | -20 °C to +80 °C / -4°F to +176°F | -20 °C to +80 °C / -4°F to +176°F |
Resources
Resources
Related products

Digital Solutions
Vibrating Wire Push-In Pressure Cells
Contact an expert
Contact an expert
