Video thumbnail

DIGITAL SOLUTIONS

Vibrating Wire Push-in Pressure Cells

A Vibrating Wire Push-In Pressure Cell, also called a Spade Cell, is designed to be pushed into the ground where it can measure total earth pressure and pore water pressure within the soil.

RST Instruments logo

Overview

A Vibrating Wire Push-In Pressure Cell, also called a Spade Cell, is designed to be pushed into the ground where it can measure total earth pressure and pore water pressure within the soil. It can be used as a site investigation tool to determine the in situ stress state, both vertical and horizontal, depending on the direction of installation. In addition, it can be used to monitor the change in active and passive pressure around retaining structures (diaphragm walls,…) as well as in tunneling, and other earthworks. Typical installations are in fine grained cohesive soils, including very soft to stiff clays.

Construction consists of two longitudinal stainless steel plates welded together around their periphery. The annular space between these plates is filled with de-aired glycol. A port and filter for pore water pressure measurement are located on one of the flat sides of the support plate behind the pressure sensitive section of the cell.

The pressure cell and the port for the pore water pressure are connected via stainless steel tubes to two vibrating wire pressure transducers integrated in the cell. A thermistor for temperature measurement is also incorporated in the cell.

The installation method consists generally in drilling a pilot hole slightly shorter than the planned installation depth, and then to push the pressure cell about 1 meter past the bottom of the pilot hole using standard drill rods or CPT rods that will be left in place or retrieved at a later stage after measurements are completed. Push rods and push adapters can also be used if the cell is to be pushed and left permanently in place with retrieval of the push rods (see ordering info).

Product features

  • Integrated pore pressure measurement
  • Stress change adjacent to retaining walls
  • Monitoring stress redistribution around tunnels in soils

Benefits

Vibrating Wire Push-In Pressure Cell Specifications

ItemSpecification
Capacity350, 700 kPa
1, 2, 3, 5 MPa
Over Range150% F.S. (maximum)
Resolution0.025% F.S. (minimum)
Accuracy± 0.5% F.S.
Sensor Type (earth and pore water pressure)Vibrating Wire
Temperature Range-20° to +80°C
Filter50 micron sintered filter
Length x Diameter x Thickness (pressure sensitive section)200 x 57 x 6.3 mm
Total Length524 mm

Industries

Icon image

Civil infrastructure

Energy

Icon image

Surface metal

Icon image

Underground mining

Contact an expert

Whether you need support, want to request a quote or simply want to learn more, reach out to our Geosolutions team. We’re here to help.