

DIGITAL SOLUTIONS
Multi-Point Bore Hole Extensometer
Stability and movement behavior of soil and rock masses can be determined by the use of Borehole Extensometers which can be deployed using between 1-6 anchors for achieving a movement profile over depth, relative to a baseline measurement, and monitored using a readout or data logger.
Overview.
Overview.
A typical Borehole Extensometer consists of a reference head, usually installed at the collar of a drill hole, and one or more downhole anchors, each anchor being is in place at a known depth in the borehole. As the soil or rock deforms, the distances between adjacent downhole anchors change, as do the distances between the individual downhole anchors and the reference head. This allows an accurate determination of distribution, magnitude, rate and acceleration of deformation in the rock or soil mass intersected by the drill hole.
The number of anchors and anchor depths should be selected based on site geology, geometry of structures in the area, and other site-specific details. The use of two, or more, anchors at various depths allows the engineer to distinguish between potentially dangerous deep seated movements and more trivial surface spalling.
Product features:
- Accurate and reliable
- Anchor lengths can be varied in the field. * for Rigid Rod Extensometers only
- Various anchor type designs are available to suit differing ground conditions
- Rugged, easy to install, and simple to operate
Features and benefits
Features and benefits
Specifications
| Sensor Range | 50, 100, 150, 200 mm |
| Accuracy | +/- 0.25% FSR |
| Resolution | 0.025% FSR |
| Linearity | 0.5% FSR |
| Operating Temperature | -20°C to 80°C |
| Thermal Zero Shift | <0.05% FSR/°C |
| Number of Anchors | 1 to 6 |
| Borehole Diameter Recommendation | Minimum 4″ (101 mm) |
Contact RST Instruments for available custom options.
Flexible rod
| ORDERING METHOD: 1) Select Above Grade or Below Grade Installation 2) Select Manual or Combination Head 3) Select type and range of sensors 4) Select type and length of rods 5) Select type of anchors |
Rigid Rod Specifications
Heads
| Item | Part # |
|---|---|
| Combination Heads | MPBX |
| Mechanical Heads | EXMPBXMA1 (1 point) EXMPBXMA3 (3 points) EXMPBXMA4 (4 points) EXMPBXMA5 (5 points) EXMPBXMA6 (6 points) |
Rods
| Item | Part # | |
|---|---|---|
| 1/4 in. Standard, Stainless Steel Individual PVC Sheath | EXRO2502 (0.25 m) EXRO2505 (0.5 m) EXRO2510 (1.0 m) EXRO2515 (1.5 m) EXRO2520 (2.0 m) EXRO2530 (3.0 m) | EXRO2535 (3 ft.) EXRO2550 (5 ft.) EXRO2600 (10 ft.) |
Anchors
| Item | Part # |
|---|---|
| Groutable | EXMP11000M (metric) EXMP11000 (imperial) |
| Hydraulic Borros | EXHY13000 (double acting) |
| Groutable with Spring Legs | EXMP12000M (metric) EXMP12000 (imperial) |
| Bladder Anchor | EXIL14000 (customer specifies borehole diameter) |
Resources
Resources
Related products

Digital Solutions
Vibrating Wire Inline Extensometer

Digital Solutions
Vibrating Wire Soil Extensometer
Contact an expert
Contact an expert
