

DIGITAL SOLUTIONS
VW Analog Interface
The VW0420 provides an interface between vibrating wire instruments and factory automation systems which support 4-20 mA sensors.
Overview
Overview
The VW0420 unit’s vibrating wire section measures the natural frequency and temperature of the sensor(s) it is connected to. The measurements are then converted to engineering units, unit converted etc. as required, and scaled to the 4-20 mA outputs. Setup of the device is straightforward, using a Windows host program connected via USB cable.
Product Features
- Maximum flexibility in connecting the system
- 4 dielectrically isolated ground subsystem
- Straightforward setup, easy to connect via USB cable
Features and benefits
Features and benefits
VW0420: Vibrating Wire Isolated Analog Interface Specifications
| Item | |
|---|---|
| Vibrating Wire Sensor Types | Piezometer, strain gauge, mini-strain gauge, displacement sensor etc. |
| Sweep Types | A,B,C,D,E,F, user-defined |
| Frequency Input | 450-6000 hz |
| Update Rate | 2 seconds |
| Vibrating Wire Calibration | mX+b, polynomial, units conversion, temperature compensation |
| Thermistor Types | NTC 3000, 2252, 5k, 10k, 2k RTD |
| Current Outputs (2) | Vibrating Wire, Thermistor |
| Current Output | 4-20 mA nominal, isolated between channels and with respect to sensor to 2500 VAC |
| Vibrating Wire Conversion Base | Raw data, engineering units, temperature corrected |
| Vibrating Wire Conversion Base Unit | B units, kPa, psi, mH2O, µe, etc |
| Temperature Conversion Base | °C, °F, ohms |
| Current Resolution | 0.002% |
| Current Conversion Accuracy | 0.02% |
| Host Program PC Connection | USB 2.0, USB mini B connector |
| Compatible Operating Systems | Windows 10 |
| Operating Temperature | -40 to 55°C |
| Power Supply | 9-24 VDC, 8-35 mA, isolated to 1000 VAC |
| Dimensions | 3.55 x 3.62 x 0.89 in. (90 x 92x 22.5 mm) |
Resources
Resources
Related products

Digital Solutions
FlexDAQ Data Loggers
Ideal for remote monitoring in both common and demanding geotechnical conditions.

Digital Solutions
DT Link Wireless Data Collection
DT LINK is a local wireless connection to RST’s DT Series Data Loggers for quick collection of sensor data to a laptop.

Digital Solutions
RSTAR l900 Wireless Data Acquisition
The RSTAR Array Radio Series uses wireless technology to provide automated data acquisition.

Digital Solutions
20/40 Channel VW Thermistor Data Logger
The DT2040 is a purpose-built logger ideal for remote locations or for instruments that will require frequent reliable data recording.

Digital Solutions
DT2485 DT Bus Data Logger
The DT2485 enables low cost, stand alone, and radio-linked data collection of In-Place Inclinometer Strings and other digital bus (DT-BUS) sensors.

Digital Solutions
5/10 Channel 4-20MA Thermistor Data Logger
The DT4205: 5/10 Channel 4-20mA Transmitter Data Logger/Thermistor Data Logger is a low cost, battery powered data logger, designed for reliable, unattended monitoring of up to 10 channels which may be any mix of 4-20mA sensors or thermistors.

Digital Solutions
dtsaa dt shapearray
The DT ShapeArray data logger is designed to measure a single ShapeArray sensor.
Contact an expert
Contact an expert
Whether you need support, want to request a quote or simply want to learn more, reach out to our Geosolutions team. We’re here to help.
